F8L10T-N/E LoRA Terminal*

*N - Without Passive Antenna, E with Passive Antenna

Note: This product comes either as LoRA or LoRAWAN. Please indicate clearly which model is required during purchase.

BUILT FOR INDUSTRIAL

  • High-Powered Industrial LoRA chip and microcontroller

  • Industrial Grade 32 bits CPU

  • Low power consumption mode, including multi-sleep and trigger modes to reduce the power usage

  • Housing: Iron, providing IP30 protection

  • Power range: DC 5~36V

FAULT TOLERANCE and PROTECTION

  • Supports hardware and software WatchDog Timer (WDT) to ensure uptime

  • RS232/RS485/RS422 ports: 15KV ESD protection

  • Power port: Reverse-voltage and Overvoltage protection

  • Antenna port: lightning protection(optional)

LoRA Performance

  • LoRA OTA Support

  • Relay Routing and Terminal Device functionality

  • Network Capacity of 65000 nodes

  • Send mode of broadcast or destination address mode

Remote Management and interfacing

  • Includes Remote Management Capabilities via AT Commands and API mode

CONFORMS TO STANDARDS

  • Adopts standard terminal block interface for industrial application. 5I/O with 3 AI, 2DI. Custom firmware can be added to vary the I/O config.

  • Supports RS232, RS485 (or RS422) and ZigBee port that can connect to serial and ZigBee devices directly

  • Interface can be customized to support TTL logic level and RS232

  • Support intelligent mode, enter into communication state automatically when powered

  • Modbus RTU Standard Protocol built-in

  • Transparent Mode for direct serial to serial over LoRA

  • AT Commands supported

Support

REQUeST FOR A DEMO

 

 

Certificiations_FX8414.jpg
F810L Side.JPG

LoRA Specification

ItemContent
Commmunication Frequency Band433/470/780/868/915 Mhz
Indoor/Urban Communication DistanceF8L10T-N - 1km, F8L10T-E - 2km
Outdoor/Visual Communication DistanceF8L10T-N - 3.5km, F8L10T-E - 11.5km
TX PowerF8L10T-N - 30dBm, F8L10T-E - 30dBm
RX SensitivityLess than -140dBm
RF Data Rate6 Level Adjustable (0.3, 0.6, 1.0, 1.8, 3.1, 5.5Kbps)

Interface Types

Item Content
Serial
  • 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection
  • Data bits: 5, 6 ,7, 8
  • Stop bits: 1, 1.5, 2
  • Parity: none, even, odd, space, mark Baud rate: 300,600,1200,2400,4800,9600,19200,38400,57600,115200 bps
  • Indicators "Power", "ACT", "Online"
    Antenna
  • LoRA: Standard SMA female interface, 50 ohm, lighting protection(optional)
  • Power
  • Terminal block interface, reverse-voltage and overvoltage protection
  • Power Supply

    Item Content
    Standard Power DC 12V / 0.5A
    Power Power DC 5 ~ 36V

    Power Consumption

    Model Working States Power Usage
    F8L10T-N Sleep 3.1~3.2mA@12 VDC, 7.3~7.4mA@5 VDC
    Receive data data 13.2~13.4mA@12 VDC, 26.1~26.2mA@5 VDC
    Transmit data 60.3~61.2mA@12 VDC, 107.3~115.1mA@5 VDC
    F8L10T-E Sleep 3.1~3.2mA@12 VDC, 7.2~7.4mA@5 VDC
    Receive data data 13.2~13.4mA@12 VDC, 26.3~26.5mA@5 VDC
    Transmit data 110-125mA@12 VDC, 210~213mA@5 VDC

    Physical Characteristics

    Item Content
    Iron IP30
    Dimensions 91x58.5x22mm
    Weight 205g

    Environmental Limits

    Item Content
    Operating Temperature -45~+85ºC
    Storage Temperature -40~+125ºC
    Operating Humidity 95% ( unfreezing)